Kodama Forum

Tired of fiddling with all these connectors ...

For tinkerers exploring the full potential of their machines.
User avatar
MaximumMark
Posts: 2
Location: Lunenburg, MA USA
Contact:

Fri Nov 17, 2017 5:14 pm  

edefault wrote:Sorry ... NC is schematicaleze for "not connected"


I'm afraid that you provided an incorrect answer; the correct term is "Normally Closed", which definitely meant that it IS by default connected!

NO = Normally Open
NC = Normally Closed

These terms describe functional switch and relay pin/post connectors' default circuit continuity and the energized or switched position of these are the opposite, where a NO connection closes when the switch is thrown or the relay is energized; conversely, the NC connection opens.

Hope this helps you avoid creating further problems and solves others. Good luck!

Regards,
Mark
Sr. Program/Project Manager Consultant, Pilot, Maker, Inventor, Gamer, Photographer, Lover.
Not necessarily in that priority!

Backer # 3,357

Trinus 3D Printer Deluxe Plus (+) Premium pledge (Every Option + Lots of Extra Filament Types & Colors

User avatar
edefault
Posts: 52

Fri Nov 17, 2017 6:07 pm  

oops ... now completely off topic. North Carolinians get their nuts crunched:
https://www.urbandictionary.com/define.php?term=NC

  •   Information
  • Who is online

    Users browsing this forum: No registered users and 1 guest