Kodama Forum

Cura 15.04 Profile for Slicing in OctoPrint

Talk about Pango, Simplify3D, Cura, and all else.
User avatar
Posts: 24
Location: Tokyo, Japan

Tue May 02, 2017 1:01 pm  

I created a profile in Cura 15.04 for the Trinus 3D Printer that can be used to slice STL files in OctoPrint.
The profile is based on the settings found in the Cura thread on the forum (http://www.kodamaforums.com/phpBB3/viewtopic.php?f=20&t=1423).

I ran a few quick tests and am now able to print directly by uploading STL files to OctoPrint. I guess will keep using the latest Cura version on my PC as my main slicer to prep files for printing but i thought this would be a handy option to have.

More information ong the Cura plugin for OctoPrint can be found here: https://github.com/foosel/OctoPrint/wiki/Plugin:-Cura

Find attached the .ini profile. The profile is text based so feel free to experiment with the settings and share the results/improvements in this thread.

Note that you can create and add multiple profiles to OctoPrint (e.g., default, high quality, with raft, ...).
(10.3 KiB) Downloaded 233 times
Last edited by barry on Tue May 09, 2017 10:11 pm, edited 1 time in total.

User avatar
Phil Maddox
Posts: 12

Tue May 02, 2017 1:53 pm  

Thanks for this Ill give it a try soon Cheers

User avatar
Posts: 8

Sat Feb 10, 2018 2:25 pm  

thanks!!! dat was useful!! for some weird reason i cant run Cura on my PC..just doesnt launch,,,oh well...wotever) u made my day) BTW can anyone tell me if Trinus has a Firmware that is Repetier based or not? does it have active EEPROM-option???
Enclosed Trinus. HBP. LCD.
Alas no leveling bed=(

  •   Information
  • Who is online

    Users browsing this forum: No registered users and 1 guest